Ultra Disk DVR 7 Instrukcja Użytkownika Pobierz pdf (Strona 34)

ALIEN616 User’s Manual V2.0.5

order to enable recordings on that particular disk again, you must set the HDD to R/W

(Read/ Write) in the HDD Property Settings menu. If multiple HDDs are used, the DVR

will automatically record to the next HDD that is not set to read-only.

4.5 Configuring Advanced HDD Settings

4.5.1 Setting up HDD Redundancy

To ensure unexpected failures of hard disk drives, it is recommended to set up HDD

redundancy. This will create duplicated data. It is important to note that in order to set up

HDD redundancy, you’ll need more than one HDD in your DVR.

To set up HDD redundancy:

1. Navigate to the HDD Management menu by clicking Menu > HDD

management.

2. Click on the General tab.

3. Select the HDD to be used for redundancy, as shown in Figure 10.

Figure 10. HDD Management Menu

4. Click the Property button. This will take you to the Property Settings menu.

5. Set HDD Status to Redundancy, shown in Figure 11. Verify at least one

other HDD is set to R/W (read/write).

6. Click the OK button to save settings and return to the previous menu.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 95 96

Brak uwag

Ultra Disk DVR 7 Instrukcja Użytkownika Strona 34